| Electrical Specifications |
|
Model |
1KW |
1.5KW |
2KW |
3KW |
4KW |
5KW |
6KW |
8KW |
10KW |
12KW |
| Inverter Output |
Continuous Output |
1KW |
1.5KW |
2KW |
3KW |
4KW |
5KW |
6KW |
8KW |
10KW |
12KW |
| Power |
| Surge Rating(20ms) |
3KW |
4.5KW |
6KW |
9KW |
12KW |
15KW |
18KW |
24KW |
30KW |
36KW |
| Output Waveform |
Pure Sine wave/Same as input(Bypass Mode) |
| Nominal Efficiency |
>88%(Peak) |
| Line Mode Efficiency |
>95% |
| Power Factor |
0.9- 1.0 |
| Nominal Output Voltage rms |
100- 110- 120Vac / 220-230-240Vac |
| Output Voltage |
± 10% RMS |
| Regulation |
| Output Frequency |
50Hz ± 0.3Hz/60Hz ± 0.3Hz |
| Short Circuit Protection |
Yes( 1sec after fault ) |
| Typical transfer Time |
10ms(Max) |
| THD |
< 10% |
| DC Input |
Nominal Input Voltage |
12.0Vdc / 24.0Vdc / 48.0Vdc |
24.0Vdc /48.0Vdc |
48.0Vdc |
| Minimum Start Voltage |
10.0Vdc / 10.5Vdc for 12Vdc Mode |
*2 for 24Vdc, *4 for 48Vdc; |
| Low Battery Alarm |
10.5Vdc / 11.0Vdc for 12Vdc Mode |
| Low Battery Trip |
10.0Vdc / 10.5Vdc for 12Vdc Mode |
| High Voltage Alarm |
16.0Vdc for 12Vdc Mode |
| Low Battery voltage recover |
15.5Vdc for 12Vdc Mode |
| Idle Consumption-Search Mode |
< 25 W when Power Saver On.(Refer to Table ) |
| Charger |
Output Voltage |
Depends on battery type (Refer to Table 2.5.2) |
| Charger Breaker Rating |
10A |
15A |
20A |
20A |
20A |
30A |
30A |
40A |
40A |
40A |
| Max Charge Power |
1/3 Rating Power (Refer to Table 2.5.3) |
| Rate |
| Battery Initial Voltage for Start |
10- 15.7Vdc for 12Vdc Mode |
*2 for 24Vdc, *4 for 48Vdc; |
| Over Charge Protection S.D. |
15.7Vdc for 12Vdc Mode |
| BTS |
Battery Temperature Sensor (Optional) |
Yes(Refer to the table ) Variances in Charging Voltage & S.D Voltage Base on the Battery Temperature. |
| Bypass & Protection |
Input Voltage Waveform |
Sine wave (Grid or Generator) |
| Nominal Voltage |
110Vac |
120Vac |
220Va c |
230Va c |
230Vac |
| Max Input AC Voltage |
150VAC For 120Vac LV Mode；300VAC For 230Vac HV Mode； |
| Nominal Input Frequency |
50Hz or 60Hz |
| Low Freq Trip |
47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz |
| High Freq Trip |
55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz |
| Overload protection (SMPS load) |
Circuit Breaker |
| Output Short circuit protection |
Circuit Breaker |
| Bypass breaker rating |
10A |
15A |
20A |
30A |
40A |
40A |
50A |
60A |
63A |
80A |
| Transfer switch rating |
30Amp for UL & TUV |
40Amp for UL |
80Amp for UL |
| Bypass without battery connected |
Yes (Optional) |
| Max bypass current |
30Amp |
50Amp |
80Amp |
| Solar Charger (Optional) |
Rated Voltage |
12Vdc / 24Vdc / 48Vdc |
| Solar Input Voltage Range |
18- 150Vdc / 36- 150Vdc / 60- 150Vdc |
| Rated Charge Current |
40 ~ 60A |
| Rated Output Current |
60A |
| Self Consumption |
< 10mA |
| Bulk Charge(Default) |
14.5Vdc for 12Vdc Mode |
( *2 for 24Vdc, *4 for 48Vdc) |
| Floating Charge(Default) |
13.5Vdc for 12Vdc Mode |
| Equalization Charge(Default) |
14.0Vdc for 12Vdc Mode |
| Over Charge Disconnection |
14.8Vdc for 12Vdc Mode |
| Over Charge Recovery |
13.6Vdc for 12Vdc Mode |
| Over Discharge Disconnection |
10.8Vdc for 12Vdc Mode |
| Over Discharge Reconnection |
12.3Vdc for 12Vdc Mode |
| Temperature Compensation |
5mV/C/2V |
| Ambient Temperature |
-25C~60C |
| Mechanical Specifications |
Mounting |
Wall Mount |
| Inverter Dimensions(L*W*H) |
340*420*200mm |
420*420*200mm |
558*415*200mm |
618*430*238mm |
| Inverter Weight(Solar Chg)KG |
16+3 |
29+3 |
22+3 |
26+3 |
31+3 |
35+3 |
37+3 |
60+3 |
64+3 |
74+3 |
| Shipping Weight(Solar Chg)KG |
19+3 |
22+3 |
25+3 |
29+3 |
36+3 |
39+3 |
41+3 |
70+3 |
74+3 |
84+3 |
| Display |
Status LEDs / Status LEDs+LCD |
| Standard Warranty |
2 Years (Optional) |
